Manufacturer's Warranty - REMS Tornado 2000 Instructions De Service

eng
Machine Wiring and Electrical Components Magnum
Machine Wiring Magnum 2000/4000
Wire colour/No.
Machine Wiring brown
blue
Connection wire brown
blue
Inner wires red
red
Connection wire brown
blue
Motor black 2
black 5
black 6
black 4
black 3
black 1
Capacitor
Electrical Components
Motor RW 345
Cam switch
Foot switch T 5310
Capacitor
6. Actions in case of trouble
6.1. Trouble: Machine does not start.
Cause:
Emergency switch not unlocked.
•
Protective motor switch engaged.
•
Worn out or faulty brushes (Tornado 2000, Magnum 2000/4000).
•
6.2. Trouble: Machine does not pull through.
Cause:
Dies are blunt.
•
Poor-quality cooling lubricant.
•
Circuit overloaded.
•
Wire cross-section of extension cord too small.
•
Bad contacts at the plug connections.
•
Worn out brushes (Tornado 2000, Magnum 2000/4000).
•
6.3. Trouble: Low or non-existent oil supply at die head.
Cause:
Pump defective.
•
Insufficient cooling lubricant in the oil tray.
•
Strainer in intake clogged.
•
6.4. Trouble: Dies too far open in spite of correct scale setting.
Cause:
Die head not closed.
•
6.5. Trouble: Die head does not open.
Cause:
Thread was cut to the next pipe diameter up with die head opened.
•
Length stop folded away.
•
6.6. Trouble: No workable thread.
Cause:
Dies are blunt.
•
Dies are wrongly positioned: see numbers.
•
Low or non-existent oil supply.
•
Magnum 2010
Terminal Terminal
Wire colour/No.
2 (emergency) brown 2 (emergency) brown
2 (emergency) blue 2 (emergency) blue
green/yellow W casing
2 (motor protect.) brown 2 (motor protect.) brown
1 (emergency) blue 1 (emergency) blue
green/yellow W casing
1 (emergency) red 1 (emergency) red
↓ ↓
13 (switch) 13 (switch)
14 (switch) red 14 (switch)
↓ ↓
1 (motor protect.) 1(motor protect.)
2 brown R
1 blue S
green/yellow W casing
brown black 1 U
1
6 black 2 V
1
5 black 3 W
1
3 black 4 U
2
4 black 5 V
2
blue black 6 W
2
green/yellow W casing
brown C
1
blue C
2
REMS RW 342 REMS RW 342
CA10 C 58761 · FT22V REMS CA10 C 58761 · FT22V REMS CA10 D-U277· 01 FT22V REMS CA10 D-U277· 01 FT22V REMS
REMS T 5300 REMS T 5300
MP 35/100/330 REMS MP 35/100/330
Magnum 4010 Magnum 2020
Terminal
Wire colour/No. Wire colour/No.
2 (emergency) brown
2 (emergency) black
green/yellow W casing
black
blue
green/yellow W casing
2 (motor protect.) black 1
1 (emergency) black 2
green/yellow W casing
black 3
black 4
black 5
green/yellow W casing
1 (emergency) red
↓
13 (switch)
red 14 (switch) red
↓
1(motor protect.)
brown R black 1
blue S black 2
black 3
black 4
black 5
green/yellow W casing green/yellow W casing
black 1 U black 1
1
black 2 W black 2
1
black 3 V black 3
1
black 4 U black 4
2
black 5 W black 5
2
black 6 V black 6
2
black 7
black 8
green/yellow W casing green/yellow W casing
brown C
1
blue C
2
REMS RW 343
REMS T 5400
REMS
Poor-quality cooling lubricant.
•
Feed movement of tool holder hindered.
•
6.7. Trouble: Pipe slips in the chucks.
Cause:
Clamping jaws very dirty.
•
Use special chucking jaws for pipes with thick plastic sheathing.
•
Clamping jaws worn.
•

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new pro-
duct to the first user but shall be a maximum of 24 months after delivery
to the Dealer. The date of delivery shall be documented by the submis-
sion of the original purchase documents, which must include the date
of purchase and the designation of the product. All functional defects
occurring within the warranty period, which clearly the consequence of
defects in production or materials, will be remedied free of charge. The
remedy of defects shall not extend or renew the guarantee period for
the product. Damage attributable to natural wear and tear, incorrect treat-
ment or misuse, failure to observe the operational instructions, unsui-
table operating materials, excessive demand, use for unauthorized pur-
poses, interventions by the Customer or a third party or other reasons,
for which REMS is not responsible, shall be excluded from the warranty.
Services under the warranty may only be provided by customer servi-
ce stations authorized for this purpose by REMS. Complaints will only
be accepted if the product is returned to a customer service station autho-
rized by REMS without prior interference in an unassembled condition.
Replaced products and parts shall become the property of REMS.
The user shall be responsible for the cost of shipping and returning the
product.
The legal rights of users, in particular the right to claim damages from
the Dealer, shall not be affected. This manufacturer's warranty shall
apply only to new products purchased in the European Union, in Nor-
way or Switzerland.
Magnum 4020
Terminal Terminal
Wire colour/No.
1 brown 1
3 black 3
5 black 5
A 1 blue A 1
green/yellow W casing
2 black 1 2
4 black 2 4
6 black 3 6
14 black 4 14
2 (emergency) black 5 2 (emergency)
W casing
green/yellow
5 →1 ( 5 →1 (emergency)
) red
emergency
13 → A 2 13 → A 2
red
L black 1 L
1 1
L black 2 L
2 2
L black 3 L
3 3
4 black 4 4
5 black 5 5
green/yellow W casing
U black 1 U
1 1
V black 2 W
1 1
W black 3 V
1 1
U black 4 U
2 2
V black 5 W
2 2
W black 6 V
2 2
7 black 7 7
8 black 8 8
green/yellow W casing
REMS RW 343 REMS
REMS T 5400 REMS
eng