Manufacturer's Warranty; Spare Parts Lists - REMS Twist Notice D'utilisation

eng
Clean plastic parts (e.g. housing) only with REMS CleanM machine cleaner
(Art. No. 140119) or a mild soap and a damp cloth. Do not use household
cleaners. These often contain chemicals which can damage the plastic parts.
Never use petrol, turpentine, thinner or similar products for cleaning.
Make sure that liquids never get onto or inside the power tool. Never immerse
the power tool in liquid.
5. Faults
5.1. Fault: Power tool does not start.
Cause:
● Worn carbon brushes.
● Mains lead defective.
● Power tool defective.
5.2. Fault: Drive unit will not rotate under load.
Cause:
● Worn carbon brushes.
● Tools not greased suffi ciently.
● Setting wheel on the safety inching switch (fi g. 2 (6)) not set correctly.
● Pipe wall too thick.
● Pipe material too hard.
5.3. Fault: Expansion/widening too narrow.
Cause:
● Expander mandrel/widening tool worn.
6. Disposal
The REMS Twist / Hurrican drive unit may not be thrown in the domestic waste
at the end of use. It must be disposed of properly by law.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the
fi rst user. The date of delivery shall be documented by the submission of the
original purchase documents, which must include the date of purchase and the
designation of the product. All functional defects occurring within the warranty
period, which are clearly the consequence of defects in production or materials,
will be remedied free of charge. The remedy of defects shall not extend or
renew the warranty period for the product. Damage attributable to natural wear
and tear, incorrect treatment or misuse, failure to observe the operational
instructions, unsuitable operating materials, excessive demand, use for unau-
thorized purposes, interventions by the customer or a third party or other
reasons, for which REMS is not responsible, shall be excluded from the warranty
8
4.2. Inspection/Servicing
WARNING
Pull out the mains plug before maintenance and repair work! This work
may only be performed by qualifi ed personnel.
The gear runs in a life-long grease fi lling and therefore needs no lubrication.
The motor of the power tool has carbon brushes. These are subject to wear
and must therefore by checked and changed by qualifi ed specialists or an
authorised REMS customer service workshop from time to timentre.
Remedy:
● Have carbon brushes changed by qualifi ed technical personnel or an
authorised REMS customer service workshop.
● Have the connecting cable changed by qualifi ed technical personnel or an
authorised REMS customer service workshop.
● Have the mains lead changed by qualifi ed personnel or an authorised REMS
customer service workshop
Remedy:
● Have carbon brushes changed by qualifi ed technical personnel or an
authorised REMS customer service workshop.
● Lightly grease the expanding mandrels and neck widening tools with the
lubricant provided (Art. No. 151240).
● Adjust the setting wheel on the safety inching switch according to the table.
● See 1. for permissible pipes. Technical data / 1.3. Applications
● See 1. for permissible pipes. Technical data / 1.3. Applications
Remedy:
● Replace expander mandrel/widening tool.
Services under the warranty may only be provided by customer service stations
authorized for this purpose by REMS. Complaints will only be accepted if the
product is returned to a customer service station authorized by REMS without
prior interference in an unassembled condition. Replaced products and parts
shall become the property of REMS.
The user shall be responsible for the cost of shipping and returning the product.
The legal rights of the user, in particular the right to make claims against the
seller under the warranty terms, shall not be affected. This manufacturer's
warranty only applies for new products which are purchased in the European
Union, in Norway or in Switzerland.
This warranty is subject to German law with the exclusion of the United Nations
Convention on Contracts for the International Sales of Goods (CISG).

8. Spare parts lists

For spare parts lists, see www.rems.de → Downloads → Parts lists.
eng