Spare Parts - Wilo Veroline IP-E Notice De Montage Et De Mise En Service

12 Spare parts

Available spare parts (see Fig. 9, 10):
Pos. Designation
1.1 Impeller kit
1.11 Impeller
1.12 Washer
1.13 O-ring
1.2 Mechanical seal kit
1.21 Mechanical seal
1.22 Spacer ring
2 Motor IP-E
3 Pump housing
3.1 Pump housing
3.3 Changeover valve (DP pump)
4 Screws M6 x 20 (22)
6 Differential pressure sensor
7 Module IP-E / DP-E
Fault-free operation of the pump can only be guar-
CAUTION!,
anteed if Wilo original spare parts are used.
When ordering spare parts, please specify the above spare part
numbers and descriptions together with all relevant data as indica-
ted on the pump and motor rating plates.
ENGLISH
Subject to technical alterations!
55