Wilo Veroline IP-E Notice De Montage Et De Mise En Service page 41

ENGLISH
7.4.2 Operation menu
3
4
The display returns to the basic setting
In the event of a fault, the fault menu
36
LC display
The currently set control system blinks.
Changing the control system:
Turn the tuning button. The new control system blinks.
Press button to store the new setting.
X
Menu is displayed..
4
If IN2 is active, this menu
"on off" appears in the display. The current selection blinks.
Switching pump on/off:
Turn the tuning button. The new setting blinks.
Press button to store the new setting.
X
2 .
X
is displayed instead of the basic setting
18
Setting
X
is skipped!
4
X
.
2