Hach LANGE EVITA OXY Manuel D'utilisation page 89

Figure 3 Transmitter assembly
v = 0.05 m/s (2"/sec).
min.
Figure 4 Installation
Installation on a
Installation in a pipe
concrete wall
The OXY 4150
The holder for the
transmitter can as shown
transmitters OXY 4100
above be installed in a
and 4150 is installed with
pipe.
two screws AISI 316
(maximum 8 mm or 5/
16") directly to a
concrete wall.
Installation of the
transmitter OXY 4150
on the cable clamp
The transfer cable is
strong enough to hold
the loose-hanging
transmitter.
The cable clamp (A) is
available as an
accessory from
Hach Lange,
(B) however is not.
English 89