Hach LANGE EVITA OXY Manuel D'utilisation page 87

D A N G E R
Potential dangers with contact with chemical/biological substances.
Working with chemical samples, standards and reagents is linked with dangers.
Make yourself familiar with the necessary safety procedures and the correct
handling of the chemicals before the work and read and follow all relevant safety
data sheets.
The EVITA OXY oxygen meter serves for the measurement of the
®
concentration of dissolved oxygen in water and specifically for the
control and monitoring of ventilation processes in wastewater treatment
plants, but also in other applications, for example in fish farming stations.
The EVITA OXY consists of a sensor of the type OXY 1100, a
®
transmitter of the type OXY 4100 and a USC signal converter (Universal
Signal Converter).
There are two types of transmitters available – a float ball version
(OXY 4100) and a probe version (OXY 4150/OXY 3150). Both versions
function according to the same principle.
The USC signal converter is available in two versions – there is the
basic version USC 5000 with point-to-point communication. Also there is
the version USC 7000 with HART
facilitates the connection of up to 15 transmitters to only two cables.
The sensor EVITA OXY 1100 is the heart of the oxygen meter. The
®
transmitter converts the measurement values detected by the sensor
into a current signal and performs simultaneously the necessary
calculations and corrections. The signal converter serves as display-
and programming unit and also offers simultaneously additional output
options.
multi-drop functionality, which
®
Figure 1 Device overview
Sensor OXY 1100
Transmitter OXY 4100
Transmitter OXY 4150/3150
USC 5000 IP 67 (NEMA 4X)
USC 7000 IP 67 (NEMA 4X)
English 87