Hach LANGE EVITA OXY Manuel D'utilisation page 105

USC 7000 relay output settings
Relay output settings 1 to 5 for USC 7000.
USC
Output
USC USC
I out 1
Relay 1
RELAY 1
Function
Off
One transmitter
All Errors
All Warnings
Timer
Off
* Units selected in the section "Default settings of the transmitter"
** So that the current output can stabilize after a cleaning, the USC will define the current output during "cleaning time" and another 10 minutes.
USC USC
Relay 3
Relay 2
RELAY 1 RELAY 1
Select Function
transmitter no. 00 Error
00-15
Error
Warning
Hi Limit
Lo Limit
Cleaning
(Figure 22, page 102).
Figure 25 Relay output USC 7000
USC USC
Relay 4
Relay 5
RELAY 1 RELAY 1 RELAY 1
*
Value Setpoint Hysteresis
Oxygen 050.00 mg/l 005.00 mg/l
0 - 999.99 0 - 999.99
Oxygen
Temperature
RELAY 1 RELAY 1
*
Setpoint Hysteresis
035.00 ºC 005.00 ºC
0 - 999.99 0 - 999.99
**
RELAY 1 RELAY 1 RELAY 1
Cleaning interval Cleaning time Relay at
000. h 00 min cleaning Open
1-999 h 1-59 min Open/Closed
RELAY 1 RELAY 1
Timer interval Active time
00 min
000. h
1-999 hours 1-59 min
RELAY 1
Relay at
error Open
Open/Closed
RELAY 1
Relay at
warning Open
Open/Closed
* RELAY 1
Relay above
limit Open
Open/Closed
*
RELAY 1
Relay below
limit Open
Open/Closed
RELAY 1
Relay at
Error Open
Open/Closed
RELAY 1
Relay at
warning Open
Open/Closed
RELAY 1
Relay at
active Open
Open/Closed
English 105