Stihl FSA 60 R Notice D'emploi page 22

English
► Depress and hold the button on the mowing
head.
► Pull out the mowing line by hand.
► If the mowing line cannot be pulled out to the
required length, install a new spool of line.
STIHL recommends keeping nylon line or poly‐
mer blades in a water bath for at least 12 to 24
hours before use to increase their useful life.
18 After Finishing Work
18.1 Preparing for Transportation or
Storage
WARNING
■ To reduce the risk of personal injury from unin‐
tended activation or unauthorized use, switch
off the motor, ensure the cutting attachment
has stopped and remove the battery before
transporting the trimmer or putting it down.
To prepare the trimmer for transportation or stor‐
age:
► Switch off the trimmer,
► Remove the battery,
► If the battery or trimmer became damp or wet
during operation, allow them to dry separately
and completely before charging or storing,
24.5.
19 Transporting the Trimmer,
Battery and Charger
19.1 Trimmer
WARNING
■ To reduce the risk of personal injury from unin‐
tended activation, never transport the trimmer
with the battery inserted.
WARNING
■ To reduce the risk of injury from loss of control
and blade or line contact, never carry or trans‐
port your trimmer with the cutting attachment
moving, 5.6.4. Ensure the cutting attach‐
ment has stopped before setting it down,
5.6.4.
When transporting the trimmer:
22
15.2.
14.2.
► When transporting the trimmer by hand, hold
the drive tube in a manner that balances the
trimmer horizontally. Keep the cutting attach‐
ment pointing backwards, opposite the direc‐
tion in which you are walking.
► When transporting the trimmer in a vehicle,
secure and position it to prevent turnover,
impact and damage.
19.2 Battery
WARNING
■ To reduce the risk of a short circuit, which
could lead to electric shock, fire and explosion,
never transport the battery with small metal
objects capable of conducting electricity (e.g.,
paper clips, nails, coins, keys),
When transporting the battery:
► Secure the battery in a container against
impact or damage. Never transport the battery
with small metal objects capable of conducting
electricity (e.g., paper clips, nails, coins, keys).
► If you are transporting the battery in a vehicle,
secure it and its container to prevent turnover,
impact and damage.
STIHL batteries comply with the requirements
set forth in UN-Manual of Tests and Criteria, Part
III, Subsection 38.3.
Commercial air, vessel and ground transporta‐
tion of lithium ion cells and batteries is regulated.
The battery is classified as a UN 3480, Class 9,
packaging group II product. Shipping it, either as
a complete tool or the battery, requires compli‐
ance with all applicable shipping regulations.
Check with the ground, vessel, air cargo or pas‐
senger airline to determine if transport is prohibi‐
ted or subject to restrictions or exemptions prior
to shipping or travel.
Normally, no further conditions have to be met by
the user in order to transport STIHL batteries by
road to the power tool's operating site. Check
and comply with any special regulations that may
apply to your situation.
18 After Finishing Work
6.
0458-832-8221-B