Télécharger Imprimer la page

Stihl FSA 60 R Notice D'emploi page 17

Masquer les pouces Voir aussi pour FSA 60 R:
Les langues disponibles

Les langues disponibles

12 Assembling the Trimmer
► Insert and tighten the screws (3).
The line limiting blade (1) comes mounted in the
deflector and may not be removed.
12.3.2
Removing a Deflector
To remove a deflector:
► Switch off the power tool,
► Remove the battery,
2
► Remove the screws (2).
► Remove the deflector (1)
12.4
Mounting and Removing a
Mowing Head
12.4.1
Mounting a Mowing Head
WARNING
■ Use of wire or metal-reinforced line is not
authorized and could be extremely dangerous.
Use only the cutting attachments recommen‐
ded in this manual, in combination with the
recommended deflector,
WARNING
■ A damaged or loose cutting attachment or
mowing head may vibrate, crack, break or
come off the trimmer which may result in seri‐
ous or fatal injury or property damage. Make
sure the mowing head and cutting attachment
are properly tightened and in good condition
before starting work,
Mowing head AutoCut C 6-2
To mount a AutoCut C 6-2 mowing head:
► Switch off the trimmer,
► Remove the battery,
0458-832-8221-B
15.2.
14.2.
1
5.6.4.
5.6.4.
15.2.
14.2.
1
2
► Position the unit so that you are facing the
underside of the deflector and the drive shaft
is pointed upwards.
► Slip the mowing head (1) onto the drive
shaft (2).
► By hand, screw the cap (3) clockwise onto the
drive shaft (2) while holding the mowing
head (1) with your other hand.
► Continue screwing down the cap until it is
securely tightened.
Mowing head PolyCut 6-2
To mount a PolyCut 6-2 mowing head:
► Switch off the trimmer,
► Remove the battery,
1
2
► Position the unit so that you are facing the
underside of the deflector and the drive shaft
is pointed upwards.
► Slip the mowing head (1) onto the drive
shaft (2).
► By hand, screw the upper part (3) clockwise
onto the drive shaft while holding the mowing
head (1) with your other hand.
► Continue screwing down the upper part until it
is securely tightened.
Mowing head DuroCut 5-2
To mount a DuroCut 5-2 mowing head:
► Switch off the trimmer,
► Remove the battery,
English
3
1
15.2.
14.2.
3
1
15.2.
14.2.
17
loading