Télécharger Imprimer la page

Stihl FSA 60 R Notice D'emploi page 12

Masquer les pouces Voir aussi pour FSA 60 R:
Les langues disponibles

Les langues disponibles

English
instructions in this manual before using the
charger.
► Charge only genuine STIHL AK or STIHL
AP series batteries. Other batteries may
burst, catch fire or explode, resulting in per‐
sonal injury and property damage.
► For indoor use only.
► Keep the charger dry. Protect it from
rain, water, liquids and damp condi‐
tions. Never insert a wet battery or
use a wet charger.
► Do not handle the charger, including power
supply cord and plug, with wet hands.
► Never use a damaged charger.
► Never charge malfunctioning, damaged,
cracked, leaking or deformed batteries.
► When storing the battery, maintain a charge
of 40 % to 60 % (2 green LEDs).
► If storing the battery in the charger, discon‐
nect the charger from the outlet.
► Operate the charger only indoors, in dry
rooms.
► Operate the charger only within the speci‐
fied ambient temperature limits,
► Keep the charger out of the reach of chil‐
dren.
► Always plug the charger into a properly
installed electrical outlet matching the volt‐
age and electrical frequency stated on the
charger.
► If too many devices are connected to a
power strip, electrical components can be
overloaded during charging, leading to
overheating and fire. If using a power strip,
never exceed its total capacity.
► Do not operate a charger that has received
a sharp or heavy blow, has been dropped
or is otherwise damaged in any way.
► Do not attempt to repair, open or disassem‐
ble the charger.
■ To reduce the risk of electric shock or fire from
a short circuit:
► Make sure the battery and charger are
completely dry before starting the charging
process.
► Never bridge the contacts of the charger
with wires or other metallic objects.
► Do not insert any objects into the charger's
cooling slots.
■ The charger heats up during the charging
process. To reduce the risk of fire:
► Do not operate on a combustible surface
(e.g., paper, cardboard, textiles) or in a
combustible environment.
► Allow the charger to cool down normally.
Do not cover it.
12
■ Chargers can produce sparks which may
ignite combustible gases, liquids, vapors,
dusts or other combustible materials. To
reduce the risk of fire and explosion:
► Do not operate in a location where combus‐
tible gases, liquids, vapors, dusts or other
combustible materials are present.
■ Using a damaged power supply cord or plug
may result in fire, electric shock and other per‐
sonal injury or property damage. To reduce
these risks:
► Have a damaged power supply cord
replaced by an authorized STIHL servicing
dealer.
► Unplug the power supply cord from the out‐
let when the charger is not in use.
► Never jerk the power supply cord to discon‐
nect it from the electrical outlet. To unplug,
grasp the plug, not the power supply cord.
24.4.
► Do not use the power supply cord for carry‐
ing or hanging up the charger.
► Make sure the power supply cord is located
or marked so that it will not be stepped on,
tripped over, come in contact with sharp
objects or moving parts, or otherwise be
subjected to damage or stress.
■ An extension cord should not be used unless
absolutely necessary. Overloading an exten‐
sion cord can result in overheating and fire. If
an extension cord must be used:
► Use only a properly wired 16 gauge (AWG
16) or heavier gauge extension cord and
the cord length should not exceed 75 ft.
► Never use an extension cord with a wattage
rating lower than the wattage on your
charger's rating plate.
► Never use an extension cord if the blades
on its plug are different from the blades on
the charger plug in number, size or shape.
► Do not link (chain) extension cords.
■ In case of fire, or if the charger or the battery it
is charging emits smoke, has an unusual
smell, feels hot or appears abnormal in any
other way:
► Immediately disconnect the charger from
the outlet. Contact the authorities in the
event of fire or explosion.
7 Charger Safety
► Check the charger's power supply
cord and plug regularly for damage.
If damaged, immediately disconnect
the plug from the electrical outlet.
0458-832-8221-B
loading