Operating Elements And Connections - IMG STAGELINE WASH-50LED Mode D'emploi

Contents
1

Operating Elements and Connections . 14

1.1 Infrared remote control . . . . . . . . . . 15
2 Safety Notes . . . . . . . . . . . . . 15
3 Applications . . . . . . . . . . . . . 15
4 Installation . . . . . . . . . . . . . . 15
5 Setting the Spotlight into Operation . 16
6 Operating the Spotlight . . . . . . . . 16
6.1 Remote control . . . . . . . . . . . . . 16
6.2 Operation via the menu . . . . . . . . . 16
7 Operation without DMX Controller . . 17
7.1 Automatic mode . . . . . . . . . . . . 17
7.1.1 Changing the speed . . . . . . . . . . 17
7.1.2 Music control . . . . . . . . . . . . . 17
7.2 Manual mode . . . . . . . . . . . . . . 17
7.3 Master/slave mode . . . . . . . . . . . 18
8 DMX Control . . . . . . . . . . . . . 18
8.1 Connection . . . . . . . . . . . . . . . 18
8.2 Setting the number of DMX channels . . . . 18
8.3 Setting the start address . . . . . . . . . 19
9 Additional Functions . . . . . . . . . 19
9.1 Reversing movement directions . . . . . . 19
9.2 Rotating the display . . . . . . . . . . . 19
9.3 Switching off the display . . . . . . . . . 19
9.4 Colour balance . . . . . . . . . . . . . 19
9.5 Behaviour without DMX signal . . . . . . 20
9.6 Making a reference move . . . . . . . . . 20
9.7 Functional test . . . . . . . . . . . . . 20
9.8 Showing system information . . . . . . . 20
10 Cleaning the Unit . . . . . . . . . . . 20
11 Specifications . . . . . . . . . . . . . 20
11.1 DMX functions . . . . . . . . . . . . . 21
11.1.1 1-channel mode . . . . . . . . . . . 21
11.1.2 9-channel mode . . . . . . . . . . . 21
11.1.3 16-channel mode . . . . . . . . . . . 22
11.2 Menu structure . . . . . . . . . . . . . 23
14
LED Moving Head
These instructions are intended for users with
basic knowledge in DMX control . Please read
these instructions carefully prior to operating the
unit and keep them for later reference .
All operating elements and connections
described can be found on the fold-out page 3 .
1 Operating Elements and
Connections
1 Infrared sensor for remote control
2 Control buttons
MENU to call up the menu, to select a menu
item or to exit a submenu
,  to select a menu item or to change
a setting
ENTER to call up a submenu, to save a set-
ting changed
3 Display
4 DMX input (XLR) for connection of a DMX
light controller or for connection to the DMX
output of a different DMX-controlled unit
5 DMX output (XLR) for connection to the DMX
input of another DMX-controlled unit
6 Mains jack for connection to a socket
(230 V~/ 50 Hz) via the mains cable supplied
7 Support for the mains fuse
Always replace a blown fuse by one of the
same type .
8 Mounting bracket
9 Holes for attaching the mounting bracket (8)