Operating Elements And Connections; Safety Notes; Applications - IMG STAGELINE LE-160 Mode D'emploi

Please unfold page 3. Then you can always see the
GB
operating elements and connections described.

1 Operating Elements and Connections

1.1 Front side (fig. 1)
1 Mounting bracket
2 Setscrews for the mounting bracket (1)
3 Lamp compartment cover
1.2 Rear side (fig. 2)
4 Switch for the selection of the operating mode of
the reflector wheel:
position "I": music-controlled rotation
position "O": permanent rotation
5 Switch for the selection of the operating mode of
the gobo wheel:
position "I": music-controlled change of gobo
position "O": permanent rotation
6 Mains cable for the connection to a mains socket
(230 V~/50 Hz)
7 Support for the mains fuse;
only replace a blown fuse by one of the same type

2 Safety Notes

The unit corresponds to the directive 89/336/EEC for
electromagnetic compatibility and to the low voltage
directive 73/23/EEC.
Attention! The unit is supplied with hazardous mains
voltage (230 V~). Leave servicing to skilled personnel
only. Never make any modification not described in
this instruction manual. Inexpert handling may cause
an electric shock hazard.
It is essential to observe the following items:
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity, and heat (admissible ambient temperature
range 0 – 40 °C).
Do not insert anything into the air vents. This may
result in an electric shock!
Do not place any vessels filled with liquid, e. g. drink-
ing glasses, on the unit.
The unit heats up very much during operation. To
prevent burns, do not touch the unit during operation
and let it cool down for some minutes after switching
off before touching it.
Do not set the unit into operation, and immediately
disconnect the mains plug from the mains socket if
1. there is visible damage to the unit or to the mains
cable,
2. a defect might have occurred after a drop or simi-
lar accident,
3. malfunctions occur.
The unit must in any case be repaired by skilled per-
sonnel.
Never pull the mains cable to disconnect the mains
plug from the mains socket, always seize the plug.
6
A damaged mains cable must only be replaced by
the manufacturer or by authorized, skilled personnel.
For cleaning only use a dry, soft cloth, by no means
water or chemicals. For the lens also a commercial
detergent for glass may be used.
No guarantee claims for the unit and no liability for
any resulting personal damage or material damage
will be accepted if the unit is used for other purposes
than originally intended, if it is not correctly connect-
ed, operated, or not repaired in an expert way.
Important for U.K. Customers!
The wires in this mains lead are coloured in accord-
ance with the following code:
green/yellow = earth
blue = neutral
brown = live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
1. The wire which is coloured green and yellow must
be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol
or coloured green or green and yellow.
2. The wire which is coloured blue must be con-
nected to the terminal which is marked with the
letter N or coloured black.
3. The wire which is coloured brown must be con-
nected to the terminal which is marked with the
letter L or coloured red.
Warning - This appliance must be earthed.
If the unit is to be put out of operation de-
finitively, take it to a local recycling plant for
a disposal which is not harmful to the envi-
ronment.

3 Applications

The unit LE-160 is especially suited for applications on
stage and in discothèques. It projects a number of
coloured patterns which change music-controlled or
automatically between 18 different motifs. They can
rotate around each other in a permanent or music-con-
trolled way to be selected by the user.
4 Inserting a Halogen Lamp
The unit is supplied without a lamp. A reflector halogen
lamp with the following specifications is required:
12 V/100 W, type MR 16 with base GZ 6,35.
Never use a lamp with a higher wattage than 100 W!
Caution!
Always disconnect the mains plug before inserting or
removing the halogen lamp! As halogen lamps heat
up very much during operation, let the lamp first cool
down after operation of the unit (minimum cooling
down time 15 minutes) before replacing it.