Infrared Remote Control; Safety Notes; Applications; Installation - IMG STAGELINE WASH-50LED Mode D'emploi

1.1 Infrared remote control

(fig . 2)
Button
DMX
press the buttons directly one after the other
SLAVE
PAN, TILT to pan and tilt the head manually
FADE / ZOOM automatic mode with colour crossfading
SOUND
GOBO
SHOW
STROBE stroboscope /stroboscope salvos /dark
R, G, B, W
1, 2, 3, 4, 6 mixed colours: RGBW white, yellow, cyan,
Important: The function of the button DMX will
only be available while a DMX signal is being
received . The other functions of the remote con-
trol will only be available while no DMX signal
is being received .

2 Safety Notes

The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous
mains voltage . Leave servicing
to skilled personnel and do
not insert anything into the
air vents; inexpert handling
may result in electric shock .
•
The unit is suitable for indoor use only . Protect
it against dripping water and splash water,
high air humidity and heat (admissible ambi-
ent temperature range 0 – 40 °C) .
•
Do not place any vessels filled with liquid, e . g .
drinking glasses, on the unit .
•
Do not set the unit into operation or imme-
diately disconnect the mains plug from the
mains socket if
1 . the unit or the mains cable is visibly dam-
aged,
2 . a defect might have occurred after the unit
was dropped or suffered a similar accident,
3 . malfunctions occur .
In any case the unit must be repaired by skilled
personnel .
Function
to switch all LEDs on /off
to enter the DMX start address:
buttons 1 – 9, SHOW = 0
to switch the slave mode on /off
to switch music control on / off
for SHOW, FADE / ZOOM
without function
automatic mode 1 – 4,
select the mode with UP/ DOWN
keep the button pressed
red, green, blue, white
magenta, purple
•
Never pull the mains cable to disconnect the
mains plug from the mains socket, always
seize the plug .
•
No guarantee claims for the unit and no li-
ability for any resulting personal damage or
material damage will be accepted if the unit
is used for other purposes than originally in-
tended, if it is not safely mounted, if it is not
correctly connected or operated, or if it is not
repaired in an expert way .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment .

3 Applications

The moving head WASH-50LED can be used
to create effect illumination, e . g . on stage or
in discotheques . The spotlight features 4 super
bright 15 W RGBW LEDs as a light source . The
LEDs can emit light in the three primary colours
(red, green and blue) and in white as well as
coloured light created from additive colour mix-
ing . Crossfading from one colour to another and
.
stroboscope effects are also supported .
The spotlight is designed for control by
means of a DMX light controller (1, 9 or 16
DMX control channels available) but may also
be operated on its own or in combination with
multiple spotlights WASH-50LED (master/slave
mode) without a controller . The spotlight can
be conveniently controlled by means of the in-
frared remote control supplied . In addition, the
integrated microphone provides effects in sync
with the music .

4 Installation

Always place the unit at a location where suffi-
cient air circulation is ensured during operation .
Never cover the air vents of the housing .
Set up the WASH-50LED on a solid and even
surface . Alternatively, install it upside down on
a crossbar, for example: Use a stable mount-
ing screw or a support for light effect units
(C hook) to fasten the mounting bracket (8) to
the crossbar . To fasten the mounting bracket to
15