Scope Of Delivery; Proper Use; Safety Instructions - Scheppach Hm140L Traduction Des Instructions D'origine

a. 90° engineers square (not included in the scope of
delivery)
b. 45° engineers square (not included in the scope of
delivery)
c. Hexagon spanner

3. Scope of delivery

• Sliding cross-cut mitre saw
• 1 x Clamping device (15)
• 2 x Workpiece supports (7)
• Dust bag (18)
• Hexagon spanner (c)
• Operating manual

4. Proper use

The mitre and trim saw is used for the cutting of wood
and plastic, according to the machine size. The saw is
not suitable for the cutting of firewood.
Warning! Do not use the device to cut materials other
than those described in the operating manual.
Warning! The supplied saw blade is only intended for
the sawing of wood! Do not use this blade for sawing
firewood!
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance of
the safety instructions, as well as the assembly instruc-
tions and operating information in the operating manual.
Only suitable saw blades may be used for the machine.
The use of any type of cutting wheels is prohibited.
The product may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
Please note that our equipment was not designed with the
intention of use for commercial or industrial purposes.
28 | GB
We assume no guarantee if the device is used in com-
mercial or industrial applications, or for equivalent work.

5. Safety instructions

General power tool safety warnings
m WARNING - Read all safety information, in-
structions, illustrations and technical data for this
product.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" used in the safety instructions
refers to mains-powered electrical tools (with a mains
cable) and battery-powered electrical tools (without a
mains cable).
1. Work area safety
a) Keep your work area clean and well-lit. Clut-
tered or dark areas invite accidents.
Do not operate power tools in explosive at-
b)
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
b)
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
www.scheppach.com