Electrical Safety; Safety In The Workplace - Royal Catering Rcam-220Pro Manuel D'utilisation

3. Usage safety
ATTENTION! READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. FAILURE TO FOLLOW THE
WARNINGS AND INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE AND/OR SERIOUS INJURY
OR EVEN DEATH.
The terms "device" or "product" are used in the warnings and instructions to refer to:
Electric meat slicer
Do not use in very humid environments or in the direct vicinity of water tanks. Prevent the device
from getting wet. Risk of electric shock!
Do not cover the air inlets/outlets. When in use, do not put your hands or other items inside the
device! Do not exceed the maximum permissible operating pressure.
3.1.

Electrical safety

a) The plug must fit the socket. Do not modify the plug in any way. Using original plugs and
matching sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes, heaters, boilers and refrigerators. There is
an increased risk of electric shock if the earthed device is exposed to rain, comes into direct
contact with a wet surface or is operating in a damp environment. Water getting into the
device increases the risk of damage to the device and of electric shock.
c) Use the cable only for its designated use. Never use it to carry the device or to pull the plug
out of a socket. Keep the cable away from heat sources, oil, sharp edges or moving parts.
Damaged or tangled cables increase the risk of electric shock.
d) If using the device in a damp environment cannot be avoided, a residual current device
(RCD) should be applied. The use of an RCD reduces the risk of electric shock.
3.2.

Safety in the workplace

a) Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to
accidents. Try to think ahead, observe what is going on and use common sense when
working with the device.
b) Do not use the device in a potentially explosive environment, for example in the presence of
flammable liquids, gases or dust. The device generates sparks which may ignite dust or
fumes.
c) If you discover damage or irregular operation, immediately switch the device off and report
it to a supervisor without delay.
d) If you are unsure about whether the device is operating correctly or if you find damage,
please contact the manufacturer's service centre.
EN