Publicité
Phase REBOOST:
Automatic phase consisting in coming back to a BOOST voltage if the DC utilizations require it (i.e., after a
complete recharge cycle BOOST, ABSORPTION and FLOATING if some DC constant consumptions are detected
the charger will restart a new complete charge cycle including a BOOST phase).
This REBOOST phase will be authorized after measuring certain battery voltage during a determined time.
3.7.2 BOOST and REFRESH in OFF position
With this setting, the charger produces a single-stage UI type charge curve. It generates a constant voltage
VFloat, supplying the current required by the battery(ies). Recharging time depends on the state of the
battery, being longer than when the BOOST is in the ON position (see 3.4.3.6).
3.7.3 BOOST in ON and REFRESH in OFF position
With this setting, the charger delivers the same charge curve IUoU as in chapter 3.6.1 but without the
REFRESH step.
18
Publicité
