Publicité
3.4.2 Setting the charger with Bluetooth
The Cristec Connect Bluetooth application is available on the Apple Store and Play
Store, enabling remote wireless connection to the device, as well as device
supervision and configuration. The complete application manual is available on our
website:
www.cristec.fr
Enable Bluetooth on your phone or tablet.
3.4.3 Add the charger
3.4.3.1 delete the charger
To delete a device, slide the charger to the right until the recycle garbage can
appears. Then confirm.
3.4.3.2 Monitoring
When you click on the connected charger, a page with various data appears. This
is the monitoring page. The Bluetooth connection icon appears, but you don't
necessarily have access to the charger's settings.
To access the charger settings, press the wheel on the right of the screen (see
chapter 3.4.3.5).
At the top of the screen, you can scroll through output voltage and current
information.
The charger may already be present when you open the
application, if you've already installed it. If not, you can add a
device by pressing the + button at the top right of the screen. When
the charger appears, simply click on it to add it to the application.
If no charger appears after 30 seconds:
- Check that the charger is powered
- Check that Bluetooth is enabled on your phone or tablet.
10
Publicité
