Cleaning And Maintenance - Nuova Simonelli MDJ ON DEMAND Manuel D'instructions

EN
• Firmware version.
• 1 and 2 dose total counter cannot be reset.
• In the middle, at the bottom, the dispensing time counter in continuous mode (in seconds)
which can not be reset.
• In the middle, the contrast value of the display adjustable with the keys (4)
To return to the working phase press the key (5)
switch.
5.4.7 APPLIANCE DEFAULT VALUE SETTING
If the key (5) is kept pressed, when switching the appliance on, its values are brought
to the preset default ones.
The concealed counters are not reset.
The display appears as the one of appliance switch on (see paragraph 5.4.1).
6.

CLEANING AND MAINTENANCE

ATTENTION
Unplug the appliance before performing any cleaning and maintenance operation.
ATTENTION
Do not pull the power cable or the appliance itself to disconnect the plug from the
power supply socket.
6.1 CLEANING
Cleanliness is a basic aspect for the proper functioning of the coffee grinder with a dos-
ing unit. A neglected coffee grinder with dosing unit may have a negative impact on coffee
dispensing as well as on the accuracy of dose and grinding. Before cleaning, make sure
the appliance is unplugged. At least once a week, remove the coffee bean container (7), by
unscrewing the appropriate fastening screw situated on the side of the container, pulling the
tab to close it (8) and remove the oily coat left by coffee beans by means of a clean cloth.
It is furthermore necessary to often clean (several times a day) the dispensing spout through
a brush and a vacuum cleaner.
In case such operations are not carried out, the aromatic oily part contained in coffee may
turn rancid with negative consequences on coffee, furthermore the lack of cleanliness may
jeopardize regularity of the dose itself.
Clean the base by means of a damp cloth.
MDJ ON DEMAND
or reboot the machine from the main
and (2) .
23