Function Block - Nuova Simonelli MDJ ON DEMAND Manuel D'instructions

• By pressing the key for two doses (5)
dispensing.
• By pressing the grinding start key (11) for more than 0.3 seconds, dispensing and count-
down until zero are activated.
• Once dispensing is completed, after 1 second, the zero returns to set value.
• The double dose counter is increased of 1.
• By pressing the increasing key (4)
time of the properly selected dose is increased or decreased.
5.4.3 CONTINUOUS DISPENSING MODE ACTIVATION
By pressing and releasing both keys (3)
vated.
Both dose keys light up and the continuous dispensing symbol appears (15)
By pressing the grinding start key (11) for more than 0.3 seconds, continuous dispensing is
activated until the grinding activation key is released.
By pressing one of the keys (3)
selection.
5.4.4 DOSE COUNTER ZEROING
By pressing both keys (4)
are reset (18-21).
5.4.5

FUNCTION BLOCK

By pressing and releasing both keys (4)
the dose selection and the dispensing start.
Furthermore, display shows the symbol (19)
After having pressed and released the keys (4)
5.4.6 APPLIANCE SWITCH ON WITH CONCEALED CONTENTS
If the key (3) is kept pressed, when switching the appliance on, a screen is entered
where the following data are displayed:
22
this lights up and the cup is filled (20) during
and decreasing one (2)
and (5)
or (5)
you return to the automatic mode of dose
and (2) for more than 5 seconds, both dose counters
and (2)
.
the continuous mode is acti-
, all functions are blocked except
and (2) , all functions stop.
MDJ ON DEMAND
EN
the dispensing
.