Parts And Controls; Introduction; Power Supply; To Use - Beurer MP 32 Mode D'emploi

3. Parts and Controls

Speed Switch
Spindle for
Attachments

4. Introduction

This manicure and pedicure instrument includes seven high-quality attachments
with a long-life sapphire coating or polishing felt. Together with the two speed
settings and clockwise/counterclockwise rotation, professional quality foot and
nail care is possible at home. All attachments can be easily stored in the storage
case.

Power supply

To ensure adequate power at all times for good and powerful treatment of the feet
and nails, this instrument is provided with a detachable power unit.

5. To Use

1. Select an attachment and gently push it onto the spindle. To remove, pull
the attachment straight out.
2. Switch the device on by sliding the Power Switch back for a counterclockwise
rotation (the Power LED will illuminate in red) or forward for clockwise
rotation (the Power LED will illuminate in green).
3. All file and cutting attachments are coated with a sapphire grain. This
ensures long life. Do not exert heavy pressure and always guide the
attachments carefully in circular movements slowly over the parts to be
treated.
4. You can choose between two speed settings („Hi" and „Lo"). To set the
desired speed setting, slide the Speed Switch back (Lo) or forward (Hi).
Power LED
Storage Case
6
Power Switch