Technical Specifications; Fcc Compliance Information; Fcc Compliance Statement - Beurer MP 32 Mode D'emploi

9. Technical Specifications

Supply Input: 100 - 240 V AC; 50/60 Hz; 0.35 A
Output: 30 V DC; 250 mA
Weight approx. 0.22 lb (100 g)
Dimension 5.98 x 1.46 x 1.46 in (152 x 37 x 37 mm)
Speed 3,800 - 4,600 rpm +/- 15%

10. FCC Compliance Information

Manicure/Pedicure Set MP 32
Responsible Party – U.S. Contact Information:
Beurer North America LP
1 Oakwood Boulevard, Suite 255
Hollywood, FL 33020
United States
1-800-536-0366
info@beurer.com

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular instal lation. If this
equipment does cause harmful interference to radio or television reception, which
can be deter mined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
9