Care, Maintenance And Disposal; Replacement Parts - Beurer MP 32 Mode D'emploi

CAUTION
Always work from the outside of the nail towards the tip. Always check
results regularly during treatment. If treatment becomes unpleasant, stop
immediately.

7. Care, Maintenance and Disposal

Turn the unit off and unplug the power cord from the electrical outlet before
cleaning the device. Clean the device with a slightly moistened cloth. You can
also moisten the cloth with a mild detergent to remove stubborn stains. Keep
water out of the device. If water does contact the device, let it dry thoroughly
before using. Clean the attachments with a cloth or brush moistened with alcohol;
dry them carefully afterwards. Do not use harsh chemicals or abrasive cleaners
on the device.
Disposal
Observe the local regulations for material disposal. Dispose of the device in
accordance with local regulations.
If you have any questions, please contact the local authorities responsible for
waste disposal.

8. Replacement Parts

A complete replacement set is available from Customer Service.
The following parts are included:
Flame milling cutter
Cylindrical milling cutter
Felt cone
Sapphire cone
6 – Coarse Sapphire Disc
Files and treats nails. Shortens thick nails. Quickly
removes large areas of the nail, so proceed with
caution when using this attachment.
7 – Fine Sapphire Disc
Files and treats nails. Only the inner disk rotates,
while the outer cover remains stationary; this enables
precise filing while minimizing the risk of skin burns.
Sapphire callus rasp
Coarse Sapphire Disc
Fine Sapphire Disc
8