Tips For Optimum Relaxation; Cleaning And Maintenance; What If There Are Problems; Disposal - Beurer MG 280 Mode D'emploi

Note
You can pause use of the device at any time with the pause button
continue using the device.
7. If you would like to end the selected programme before the 15-minute programme duration has elapsed,
press the ON/OFF button
8. After every use, take the mains part out of the socket.

8. Tips for optimum relaxation

- When stretching, try to let yourself lie back and relax, in order to enjoy using the device without exertion.
- Breathe slowly and deeply through the nose and try to find an even breathing rhythm.
- On programmes that use rotating movements, you can gently move your head or body in line with the move-
ment.
- At the beginning, gently get your body used to the stretching movements. When you are familiar with the use
of the device and are comfortable with the treatment, you can repeat the treatment as often as you like.

9. Cleaning and maintenance

Cleaning
WARNING
• Always unplug the mains part from the socket and disconnect it from the device before carrying out any
cleaning.
• Clean the device using only the methods specified. Under no circumstances may liquid enter the device
or the accessories.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry detergent
where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
Storage
If you do not plan to use the device for a long period of time, we recommend that you store it in the original packing
in a dry environment, ensuring it is not weighed down by additional items.

10. What if there are problems?

Problem
The device's 7 air
chambers do not
inflate.

11. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its ser-
vice life. Dispose of the device at a suitable local collection or recycling point in your country. Dispose
of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for waste disposal.

12. Technical specifications

Mains operation:
Input
Output
Efficacité moyenne en fonctionnement :
. The device is now switched off.
Cause
The mains part is not plugged into
the device
The device turns itself off
automatically after the 15-minute
programme duration (automatic
switch-off)
. Press the pause button
Solution
Plug the mains part into the device and turn
on the device using the ON/OFF button
Turn on the device again using the ON/OFF
button
100-240 V~, 50/60 Hz, 0.8 A
12.0 V 3.0 A, 36.0 W
≥ 87.85 %
16
again to