3)
Close the battery switch BCB when indicated by the display.
Picture 20 – Connecting the battery
4)
Close the output switch OCB when required and immediately after the display will require
to open the manual bypass switch MBCB. The inverter will start.
Picture 21 – Closing the UPS output switch
48
OMP06262 REV. E
Installation and start-up of KEOR HPE UPS 200-250-300 kVA
Installation et démarrage de l'ASI KEOR HPE 200-250-300 kVA
Installazione e avviamento KEOR HPE UPS 200-250-300 kVA