LEGRAND KEOR HPE 200 kVA Manuel De Fonctionnement page 205

5.5.1.3 Device type
Indicates the device type (ON LINE, ECO, etc.).
5.5.1.4 Operating mode
Indicates the operating mode, which may be SINGLE, or PARALLEL if the system is in
parallel with other UPSs.
5.5.1.5 Running hours
The number of hours the UPS has been in operation.
5.5.1.6 Green conversion
When the UPS is in the green conversion operating state this section will display the
remaining time that the UPS will remain in this operating state. If the UPS is not in the green
conversion operating state the "-" symbol will be visible.
5.5.1.7 Clock
The time and date currently in the system.
5.5.2 Parallel information
The page containing the information about the parallel is only enabled if the UPS is in parallel
with others UPS.
Picture 34 – Parallel information
5.5.2.1 Parallel index
The first number identifies the position of that specific UPS within the parallel system. The
second number represents the total number of UPS units.
5.5.2.2 Master / Slave priority
The string on the second line may have two values, "MASTER" or "SLAVE". Only one MASTER
UPS can be present in the system; if not there will be a conflict on the data communication bus.
44 OMP06263 REV. D
UPS user manual
Manuel de l'utilisateur de l'ASI
Utilizzo dell'UPS