LEGRAND KEOR HPE 200 kVA Manuel De Fonctionnement page 199

5.4.1 Setting date and time
Date and time may be set via the CLOCK page.
Picture 24 – Clock manual setting
Setting the current date and time correctly
The correct setting of the date and time is essential for the recording of the event log.
The system also allows the setting of a NTP server for the synchronization of date and time.
Such configuration mode is enabled by pressing the label Disabled. As the NTP server is
enabled the data can't be manually entered anymore.
Picture 25 – Clock automatic setting
The NTP server access parameters can be configured via the Network configuration pages in
the Settings section. In case the server does not respond or the LAN connection is lacking, the
message NTP ERROR will be displayed.
38 OMP06263 REV. D
UPS user manual
Manuel de l'utilisateur de l'ASI
Utilizzo dell'UPS