After Countdown Of Set Time; Correcting Duration; Canceling Countdown; Safety Lock - Gaggenau VI 414 610 Notice D'utilisation

3 Set the desired duration by briefly touching the
sensor keys A or @.
Tip:
Touch and hold the touch keys A or @ to increase
or decrease the set duration more rapidly.
Note: If after 15 seconds nothing is inputted, the
timer will automatically turn off.
To confirm and start the timer, touch the Š touch
4
key. If confirmation is not received within 15
seconds, the countdown starts automatically.
A signal sounds and the duration begins to count
down on the display.
The timer continues to run even after turning off the
cooking zone until the set time has expired.

After countdown of set time

An acoustic signal indicates that the countdown of the
set duration is complete. The display blinks slowly.
Tap the Š touch key. The display goes out and the
acoustic signal ceases.
The acoustic signal ceases automatically after three
minutes. The ‹‹ and Š notification continue to blink
until the Š touch key is touched or a control knob is
operated.

Correcting duration

Tap the Š touch key and re-adjust the duration.
1
Tap the Š touch key again to start the countdown
2
with the modified time.

Canceling countdown

Tap Š touch key, change duration to ‹‹ and confirm.
Tip:
If you touch and hold the Š touch key, the remaining
time is deleted and ‹‹ is displayed.
14

Safety lock

For your protection, the appliance has a safety shut-off
feature. Depending on the set power level, heating is
switched off after a certain time if nothing is operated
during this time.
Power level Switching off after
1 to 6 4 hours
7 3 hours
8 and 9 2 hours
10 to 12 and booster 1 hour
function
An audible signal indicates when the duration has
elapsed. The cooktop indicator continues to light up
continuously. The illuminated ring behind the activated
control knob flashes fast.
Turn the control knob to 0. You can then operate the
appliance in the way to which you are accustomed.