AL-KO BKS 35/35 Mode D'emploi page 15

For security reasons always replace the fuel tank and its
cap when being damaged.
1.1.6.1 Oil for Saw Chains
To lubricate saw chain and guide bar, use only ecologi-
cal, biologically degradable quality oil for saw chains,
eventually oil for saw chains on the basis of mineral oils
(ISO VG 100).
Never use used oil! Used oil Used oil does not
lubricate the chain sufficiently and besides it
can harm the environment.
When working with the chain saw, there can appear a
kickback.
This kickback can be caused when the top ending of the
guide bar touches the wood or any other firm object.
At this moment, the chain saw stops to be controllable
and it is kickbacked with high velocity in the direction to
the user. This can cause severe injury.
1.1.6.2 Danger of kickback
Danger of kickback.
Kickback can cause fatal injury.
If you want to avoid kickbacks, follow these instructions:
Hold the chain saw firmly in both hands
−
Start cutting when the unit is already running – cut
−
only at the full performance.
Never cut using the top of the guide bar.
−
Always watch the end of the guide bar.
−
Never use the chain saw with the stretched arms.
−
Never cut on the ladder or above the shoulder level.
−
Be careful when going on with the started cut.
−
Never work too much leaned to the front.
−
Never cut more brunches at the same time.
−
Always work with the correctly sharpened and tight
−
saw chain.
Release the chain saw out of the cut only when the
−
saw chain is running.
All manuals and user guides at all-guides.com
1.2
2
2.1
This chain saw is designed for infrequent use by home-
owners or gardeners and is intended for such general
applications as:
−
−
−
It is not intended for professional (industrial) use.
Due to vibration, prolonged periods of operation may
cause circulatory or nerve problems in the user's fingers,
hands and joints of hands. There may appear prickling of
body parts, itching, twinge, pains, and skin changes. In
this case, medical examination is recommended.
2.2
Only use the original spare parts and original accessory
(see the list of spare parts).
GB 2
Safety Symbols on the Unit
WARNING – Be extremely careful.
Read the operating instructions.
Wear protective headpiece, protective
glasses and ear defenders.
Wear protective gloves.
angle ca 20°, measured under ISO 9518
norm
Danger, beware of kickbacks!
Avoid bar nose contact with the cut object.
Danger of kickback!
Do not attempt to hold the saw with one
hand only.
Recommended cutting procedures:
Hold the saw with both hands.
Use Purposes of the Unit
Determined Usage
clearing,
pruning,
cutting firewood.
Spare Parts and Accessory