Publicité
NOTICE
This manual was written by the Yamaha Motor
Company primarily for use by Yamaha dealers
and their qualified mechanics. It is not possible to
put an entire mechanic's education into one
manual, so it is assumed that persons using this
book to perform maintenance and repairs on
Yamaha snowmobiles have a basic understand-
ing of the mechanical concepts and procedures
inherent in snowmobile repair. Without such
knowledge, attempted repairs or service to this
model may render it unfit and/or unsafe to use.
Yamaha Motor Company, Ltd. is continually striv-
ing to improve all models manufactured by
Yamaha. Modifications and significant changes
in specifications or procedures will be forwarded
to all authorized Yamaha dealers and will, where
applicable, appear in future editions of this manual.
SRX700, SRX700S
SERVICE MANUAL
©1999 by Yamaha Motor Co., Ltd.
1st Edition, August 1999
All rights reserved. Any reprinting or
unauthorized use without the written
permission of Yamaha Motor Co., Ltd.
is expressly prohibited.
Printed in Japan
All manuals and user guides at all-guides.com
HOW TO USE THIS MANUAL
Particularly important information is distinguished
in this manual by the following notations:
The Safety Alert Symbol means ATTENTION!
BE ALERT! YOUR SAFETY IS INVOLVED!
WARNING
Failure to follow WARNING instructions could
result in severe injury or death to the snowmobile
operator, a bystander, or a person inspecting or
repairing the snowmobile.
CAUTION:
A CAUTION indicates special precautions that
must be taken to avoid damage to the snowmo-
bile.
NOTE:
A NOTE provides key information that can make
procedures easier or clearer.
MANUAL FORMAT
All of the procedures in this manual are organized
in a sequential, step-by-step format. The informa-
tion has been compiled to provide the mechanic
with an easy to read, handy reference that con-
tains comprehensive explanations of all inspec-
tion, repair, assembly, and disassembly opera-
tions.
In this revised format, the condition of a faulty
component will precede an arrow symbol and the
course of action required to correct the problem
will follow the symbol, e.g.,
•
Bearings
Pitting/damage → Replace.
EXPLODED DIAGRAM
Each chapter provides exploded diagrams before
each disassembly section to facilitate correct dis-
assembly and assembly procedures.
Publicité
