Télécharger Imprimer la page

Yamaha SRX700D Manuel D'atelier page 188

Publicité

All manuals and user guides at all-guides.com
PRIMARY SHEAVE AND DRIVE V-BELT
SDN4150
a
b
SDN4160
SDN4170
SDN4180
ASSEMBLY
1. Install:
Sliding sheave
(onto the spider)
NOTE:
Be sure the sliding sheave match mark (X) is
aligned with the spider match mark (X).
2. Install:
Fixed sheave
(onto the spider)
NOTE:
®
Apply LOCTITE
#648 to the fixed sheave as
shown.
CAUTION:
®
LOCTITE
should be applied only to the specified
area. Never apply it to the bushings and other
areas.
a 16 mm (0.63 in)
b 30 ~ 35 mm (1.18 ~ 1.38 in)
3. Install:
Fixed sheave stoppers 1
NOTE:
Stopper tapered portion should face fixed sheave.
4. Tighten:
Spider
Tightening steps:
Finger-tighten the spider until it is stopped by
the fixed sheave stopper.
Hold the fixed sheave with the clutch spider
separator 1.
Clutch spider separator:
90890-01711, YS-28890-B
NOTE:
Securely fit the projections on the clutch separa-
tor adapter 2 into the fixed sheave holes.
4-6
POWR
TR

Publicité

loading

Ce manuel est également adapté pour:

Srx700sd