Publicité
All manuals and user guides at all-guides.com
SDN4480
4-21
JACKSHAFT
JACKSHAFT AND DRIVE CHAIN HOUSING
INSTALLATION
1. Install:
•
Drive chain housing
•
Jackshaft
Installation steps:
•
Install the drive chain housing 1.
•
Tighten the bolts 2.
Bolt (drive chain housing) 2:
48 Nm (4.8 m • kg, 35 ft • lb)
•
Temporarily tighten the nuts 3.
•
Tighten the nuts 4.
Nut (jackshaft) 4:
60 Nm (6.0 m • kg, 43 ft • lb)
•
Retighten the nuts 3.
Nut (bearing holder) 3:
23 Nm (2.3 m • kg, 17 ft • lb)
•
Tighten the set screws 5.
Set screw (bearing) 5:
8.5 Nm (0.85 m • kg, 6.1 ft • lb)
•
Install the drive chain housing cover 6.
Å Properly install the rubber seal onto the drive chain
housing, making sure that these are no gaps.
•
Tighten the bolts 7.
Bolt (drive chain housing cover) 7:
24 Nm (2.4 m • kg, 17 ft • lb)
POWR
TR
Publicité
