Tintometer Lovibond SD 325 Con Mode D'emploi page 43

(t.Cor = Lin)
SD_325_Con_1 06/2020
Setting: Calibration reminder
oFF No calibration reminder
1 ... 730 Calibration reminder (in days)
Setting: TDS conversion factor
0.40–1.00 Conversion factor for
TDS determination
Selection: Temperature unit
°C All temperature information
in degrees Celsius
°F All temperature information
in degrees Fahrenheit
Selection: Temperature input
ntc NTC 10 kΩ sensor
(measuring cell: LC 12, LC 10)
Pt Pt1000 sensor (measuring cell: LC 16)
Selection of temperature compensation
oFF Do not compensate conductivity
measurement
nLF Non-linear function for natural water
according to EN 27888 (DIN 38404)
NaCl Compensation of weak NaCl
solutions (pure and ultrapure water)
Lin Linear temperature compensation
Setting of the coefficient for linear temperature
compensation
0.300 ... Temperature compensation coefficient
3,000 in % / °C.
Reference temperature for temperature com-
pensation
25°C / 77°F Specification of conductivity
at 25°C / 77°F
20°C / 68°F Specification of conductivity
at 20 °C / 68 °F
*
*
*
*
*
*
47