Connections; Control Elements - Tintometer Lovibond SD 325 Con Mode D'emploi

2 Summary

2.1 Connections

2.2 Control elements

325 Con
1 3
2 4
Button Name
1 Mode / Cal
2 On / Off / Esc • Switch instrument on
3 Up / Max
4 Down / Min
5 Store / Read
6 Enter / Setup • Confirm selection
*
Button function in operating mode
SD_325_Con_1 06/2020
Universal output: USB interface, power supply,
analogue output
7-pin bayonet connection: connection for
the conductivity sensor with integrated tem-
perature sensor
5
6
Brief button press
• Change measuring parameter*
(Con / TDS / SAL / Res)
• Back
• Scroll upwards
• Display max value*
• Scroll downwards
• Display min value*
• Operate data logger (logger on)
• Save/freeze measurement value
"HLD" (logger off)*
• Start new measurement with
auto-HLD*
• Cell constant alignment*
Long button press
Start calibration
Switch instrument off
Delete max value
Delete min value
Open data memory
Open configuration
menu
41