Description Of Functions - Tintometer Lovibond SD 325 Con Mode D'emploi

4.3.2 Description of functions

Menu Parameter
Start the logger
(Return to opera-
ting mode)
Stop the logger
(Return to opera-
ting mode)
Read manually stored measurement data
Record = St. X
Deletion of the data logger
CLr no
CLr ALL
CLr LASt
Read calibration data
Calibration data
= C.d. X
(*) <Logg Run>, <Logg Stop> appear only if the cyclical logger is being used (Func = Cycl)
(**) <rEAd logg> appears only if the individual value logger is being used (Func = Stor)
SD_325_Con_1 06/2020
Values Meaning
Read up to 1,000 records (X = 1 to 1,000)
Measurement Display Con, TDS, SAL or Res
value
Temperature Display °C or °F
L ID Display of the selected
measuring location
Date Display day/month and time
Cancel delete
Delete the entire memory
Delete the last record saved
Selection of up to 16 sets of calibration
data (X = 0 to 15)
CELL rAnG Cell constant range
CELL FACt
Multiplication factor
rEF Value of the reference
solution used
Date Display day/month and time
*
*
**
53