Display - Tintometer Lovibond SD 325 Con Mode D'emploi

Button combination
+
+

2.3 Display

Symbol
or
MAX / MIN
HLD
nLF / NaCl / Lin
% 1
(°C) / cm
logg
42
Long button press
Open extended configuration menu
Restore factory settings
Meaning
Display arrows for identifying a selected parameter
Main display for showing the selected measuring
parameter ( )
• Conductivity Con (µS/cm, mS/cm)
• Dissolved solid TDS (ppm)
• Salinity SAL (PSU)
• Resistance Res (kΩ*cm, MΩ*cm)
-> With the <Mode> button, toggle between Con, TDS,
SAL and Res
Side display for showing the
• temperature (°C / °F)
Display bar for showing the battery status
Display for showing the stored max/min measurement values
Display for showing a frozen measurement value
Display of the temperature compensation selected
in the configuration menu
Additional configuration units
Display for showing the logger mode. In the case of auto-
matic data recording (Func-CYCL), the display arrow above
logg flashes > <
SD_325_Con_1 06/2020