GE 21095 Mode D'emploi page 35

M
EMORY
The handset and base each have their own separate memory dialing
storage areas. Fifty 15-character names and 20-digit telephone numbers
can be stored in the handset memory. Fifty 15-character names and 20-
digit telephone numbers can be stored in the base memory.
S N
TORING A AME AND
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM/mem button on the base or handset.
3. Press the desired memory location button (01 through 50) or, use the CID/
vol ( or ) button on handset or CID/messages (
base to select the memory location. If the memory location is occupied, the
memory location and stored name and number appear in the display. If the
memory location is empty, EMPTY shows in the display.
4. Press the MEM/mem button again. The display shows ENTER NAME .
NOTE: If you don't want to enter the name, skip step 5.
All manuals and user guides at all-guides.com
N M
UMBER IN
SELECT MEMORY
01-50
* * EMPTY * *
ENTER NAME
EMORY
- -
MEMO
or
0 3
MEMO
0 3
MEMO
) button on the
35