Publicité
Les langues disponibles
Les langues disponibles
2. Press CID/vol (
button on the base until the desired CID record is displayed. Depending
on (a) how the incoming phone number was formatted when it was
received, and (b) whether or not you previously pre-programmed your
local area code into memory, you may need to adjust the format of the
incoming caller's stored phone number before dialing it back. The
format button lets you change the format of the displayed number.
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
NOTE: If the incoming number is a Direct Dial Number, it is supplied by your
local phone company, and you may not adjust its format. When you press the
format/conference button on handset or the format/conf. button on the base,
PRESS TALK KEY displays. Press the talk/callback button on handset or the
speaker/callback button on base to dial the number.
3. If the number does not dial as shown, press the format/conference
button on handset or format/conf. on the base. Repeat if necessary, until
the correct number of digits show in the display.
4. Press the talk/callback button on the handset or speaker/callback on the
base. The number dials automatically.
NOTE: If the number is corrupted, such as a number in a name or an
alphabetical character in a number, an error tone sounds from the handset or
base and the number cannot be dialed.
All manuals and user guides at all-guides.com
or
) button on the handset or CID/messages (
Explanation
long distance code "1 "
+3- digit area code +7-digit
telephone number.
3-digit area code +7-digit
telephone number.
7-digit telephone number.
or
Example
1-317-888-8888
317-888-8888
888-8888
)
43
Publicité
