GE 21095 Mode D'emploi page 18

1. Use the touch-tone pad to enter your three digit area code.
2. Press the MUTE/program button to save, and DEFAULT SETTING 1YES
2NO shows in the display.
D
EFAULT
As you become familiar with this system, you may prefer to use the
system's original settings. Follow the steps to return to the factory settings.
1. Use the touch-tone pad to select 1YES or 2NO , or press the CID/ messages
( or ) button to scroll to 1YES or 2NO . The default setting is NO .
• If you select YES , all settings in the programmable menu on the base
return to the factory default settings.
• If you select NO , your programmed setting are retained.
2. Press the MUTE/program button to save, and the display returns to the
main menu.
P
ROGRAMMING THE
There are seven programmable menus on handset: LANGUAGE,
HANDSET NAME, AREA CODE, RING TONE, REGISTRATION,
DEREGISTRATION and DEFAULT SETTING.
NOTE: You can press the mute/program button at any time to go to the next
option. To exit the menu, press the mute/program button or press the exit/
answerer button to keep the previous setting.
L
ANGUAGE
1. Make sure your handset is OFF (not in talk mode).
2. Press the mute/program button until SET LANGUAGE 1ENG 2FRA 3ESP
shows on the display.
18
All manuals and user guides at all-guides.com
DEFAULT SETTING
1 YES 2NO
H
ANDSET