GE 21095 Mode D'emploi page 36

5. Use the touch-tone pad on your handset or base to enter a name (up to
15 characters). More than one letter is stored in each of the number
keys. For example, to enter Bill Smith, press the 2 key twice for the letter
B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
letter L. Wait for 1 second. Press the 5 key 3 times for the second letter L,
and press the 1 key to insert a space between the first and last name.
Press the 7 key 4 times for the letter S; press the 6 key once for the letter
M; press the 4 key 3 times for the letter I; press the 8 key for the letter T;
press the 4 key twice for the letter H.
NOTE: If you make a mistake press the flash/delete button on the base or
handset to backspace and erase the wrong character(s) or number(s).
6. Press the MEM/mem button to save. The display shows ENTER TEL
NUMBR .
7. Use the touch-tone pad on your handset or base to enter the area
code followed by the telephone number (up to 20 digits, including
pauses) and press the MEM/mem button again to save. The unit beeps
to confirm.
8. To enter another name and number in a different memory location,
please follow step 1 and repeat the process.
S R
TORING A EDIAL
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the redial button on the handset or base.
36
All manuals and user guides at all-guides.com
ENTER TEL NUMBR
NAME
HANDSET 1
N
UMBER
0 3
MEMO