Homelite HBL26BVB Manuel D'utilisation page 18

EN
FR DE ES IT
Engine speed at idling
by adjusting idle screw ............................ 0-5000 /min
...................................... 8500 /min
Sound power level according to EN 15503:2009 Annex
A(Blower/vaccum)
Racing ...................................................88.0 / 89.4 dB(A)
Idling ......................................................69.0 / 74.2 dB(A)
L .....................................................108 / 109.4
WAeq
dB(A)
Sound pressure level at operator position(Blower/
vaccum)
Racing .................................................100.9 / 96.6 dB(A)
Idling ......................................................82.4 / 80.8 dB(A)
L ...................................................100.2 / 95.9 dB(A)
pAeq
Uncertainty of sound level measurement ...............3.0 dB
vibration value at handle according to EN 15503:2009
Annex B
Blower mode racing ........................................... 31.3 m/s
Idling .................................................................... 6.2 m/s
Equivalent vibration total value .......................... 29.1 m/s
Vacuum mode Racing .......................................... 14 m/s
Idling ....................................................................... 7 m/s
Equivalent vibration total value .......................... 13.2 m/s
Uncertainty of vibration measurement ................. 1.5 m/s
KNOW YOUR BLOWER/VACUUM
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BLOWER TUBE AND NOZZLES
blower without using any tools.
POSITIVE SWITCHES
will only run if both the metal contacts are inserted into
contact with rotating parts.
TWO ENGINE KILL SWITCHES
that the engine can be stopped easily by pressing either
switch. Both switches should be set to ON to run the
engine.
HIGH VELOCITY NOZZLE WITH WET LEAF SCRAPER
allows you to scrape wet leaves or debris while operating
the blower.
PT NL SV DA NO FI
English (Original instructions)
HU CS RU RO PL
MOTOR
power to handle tough blowing and vacuuming jobs.
THROTTLE TRIGGER
and full throttle.
VACUUM
Converting the blower to a vacuum is simple and can be
done using a cross head screwdriver.
VACUUM BAG
the elbow tube.
VACUUM HANDLE
²
²
comfortably.
²
²
VACUUM TUBES
²
²
² cross head screw driver.
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
PACKING LIST
Blower tube/nozzle
Upper vacuum tube
Lower vacuum tube
Adaptor installed in vacuum bag
Lubricating oil
Operator's manual
Figure sheet
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
Inspect the product carefully to make sure no breakage
16
SL HR ET LT LV SK BG
WARNING