Kettler SM 3290 Mode D'emploi page 25

Target pulse (age-related)
• Make selection with "+" or "–"
• Fat burning 65 %, Fitness 75 %, Manual 40 - 90%
Confirm with "SET" (e.g. Manual 40 -90 %)
• Enter values with "+" or "–" (e.g. Manual 83)
Confirm with "SET" (end of default mode)
Display: readiness for training with all defaults
or
target pulse (40 - 200)
• Deselect age entry with "+" or "–". Display: "AGE
OFF"
Confirm with "SET".
Display: next default "Pulse Off" (target pulse)
• Enter value with "+" or "–" (e.g. 146)
Confirm with "SET" (end of default mode)
Display:
readiness for training with all defaults
Comment
An overview of all settings options in the programmes is
summarised in the tables.
(See page 28)
Training Programme is now ready
Exertion
• Change exertion with "+" or "–"
Start of Training
b) Exertion Profiles (PROGRAM) "1" – "6"
All profiles are selected by pressing "PROGRAM"
e.g. Display "1"
Fitness Newcomer I. Exertion Level 1-4. 27 Min
Press "SET": Settings Range. For settings see table on
page 28
Start of Training
• Press "PROGRAM" until Display
Fitness Newcomer II. Exertion Levels 1-5. 30
Min
Press "SET": Settings Range. For settings see table
on page 28
Start of Training
• Press "PROGRAM" until Display
Advanced I. Exertion Levels 1-6. 36 Minutes.
Press "SET": Settings Range. For settings see table
on page 28
Start of Training
• Press "PROGRAM" until Display
Advanced I. Exertion Levels 1-7. 38 Minutes.
Press "SET": Settings Range. For settings see table
on page 28
Start of Training
All manuals and user guides at all-guides.com
"2"
"3"
"4"
25
GB