Kettler SM 3290 Mode D'emploi page 21

Pulse Measurement
The pulse measurement can be carried out in 3 places:
1. Ear Clip
The plug is inserted into the socket and the hand pulse
is switched off
2. Hand Pulse
The connector is plugged in on the rear side of the dis-
play
3. Chest strap
Please observe respective instructions.
Display
The display provides information about the various func-
tions and the settings modes selected.
Programmes: Count up / Count down
The programmes are differentiated through their numbe-
ring systems.
Programmes:
Exertions over time or distance
Pre-set profiles 1-6
Pulse-driven programmes: HRC1/HRC2
Target pulse over time
Two programmes which regulate exertion through the pre-
set pulse value.
Display values
The sample displays show operation as Crosstrainer.
With corresponding speed with the sample displays, the
values for speed and distance are lower for crosstrainer
and higher for exercise bike.
For 60 min –1 (RPM)
Crosstrainer: = 9,5 km/h
exercise bike: = 21,3 km/h
All manuals and user guides at all-guides.com
21
GB