Publicité
Les langues disponibles
Les langues disponibles
Foot Brake
Before operating the vehicle, push down on the pedal to apply the front and rear brakes. When pressed, the
lever or pedal should feel firm. A soft brake pedal would indicate a possible fluid leak or low master cylinder
fluid level, which must be corrected before riding. Contact your dealer for proper diagnosis and repairs.
Starting the Engine
Never run an engine in an enclosed area� Engine exhaust contains poisonous carbon monoxide and
can cause loss of consciousness, resulting in severe injury or death�
Starting a Cold Engine
1. Verify the gear selector is shifted to the Parking or Neutral position.
2. Apply the foot brake.
3. Press the engine stop switch and main key switch to "
4. Verify the throttle is completely closed, then turn the key start switch.
5. Once the engine starts, continue to warm the engine for a short period before operating the vehicle.
Operating Your Vehicle
WARNING
85
" ( O N ) .
Publicité
