Publicité
Les langues disponibles
Les langues disponibles
Tire Installation
Apply a thin layer of lubricant onto the inner beads of the tire
and wheel opposite of the beadlock inner ring.
Seat the tire outer bead in the shoulder of beadlock inner ring.
Ensure the beadlock inner ring is positioned in the center of tire.
Align tire light point ( the yellow point on tire) with the inflating
valve.
- Tire outer bead
1
- Beadlock inner ring shoulder
2
Beadlock Clamp Ring Installation
Install all the beadlock ring bolts in a criss-cross sequence, To
avoid mis-threading, follow the number sequence as shown
and screw by hand.
To ensure even pressure on the beadlock clamp ring, pretighten
bolts a few turns at a time.
Blue thread locker on the bolt threads is recommended�
Beadlock ring bolts (first torque): 26 in-lb (3N·m ± 1N·m)
Maintenance
NOTE:
169
1
9
1
13
5
16
12
4
8
14
10
2
2
7
3
11
15
6
Publicité
