Publicité
Les langues disponibles
Les langues disponibles
Change the Coolant
Never remove the radiator cap If the engine is hot. Wait for the
engine to cool down before removing the radiator cap. Hot coolant
can cause serious burns.
1. Place the vehicle on a level ground and keep it in parking state.
2. Wait for the engine cooling down to ambient temperature, then
inspect the coolant level.
3. Remove the front access cover.
4. Remove radiator cap ( 1 ) and coolant reservoir cap ( 2 ) .
5. Place a container under the front of engine coolant drain bolt
( 3 ) , then remove the drain bolt and washer.
6. Wait until coolant has drained completely, then install the
coolant drain bolt and washer. Replace with new one if washer
is damaged. Do not fully tighten the drain bolt at this time.
7. Remove the coolant reservoir hose and allow it to drain
completely, then install the coolant reservoir hose.
8. Fill coolant into the radiator using the funnel supplied with the
vehicle. NOTE: The funnel should be cleaned completely of
any oil or other substance that may contaminate the coolant.
Maintenance
WARNING
146
1
2
3
Publicité
