Publicité
Les langues disponibles
Les langues disponibles
Break-In Period
The break-in period for a new engine is very important. Careful treatment of a new engine at the beginning of
ownership will result in more efficient performance and longer life. Perform the following procedures carefully:
1. Select an open area that allows room to familiarize yourself with vehicle operation and handling.
2. Place the vehicle on a level surface.
3. Fill the fuel tank with gasoline.
4. Check the engine oil level. Add the recommended oil if necessary to maintain the oil level between the
minimum and maximum indicators on the dipstick.
5. Position yourself in the operating position on the vehicle, fasten the seatbelt and safety nets or side
doors, and start the engine. Allow the engine to idle for a short period before operating.
6. Press the foot brake, select the desired gear, and then release the foot brake.
7. Apply throttle. Drive slowly at first, varying throttle positions not more than ½ throttle for 10 hours or 100
miles, then another 10 hours or 100 miles of not more than ¾ throttle (whichever interval arrives first). Do
not operate at sustained idle or sustained wide open throttle.
8. Do not pull or carry any heavy loads during the break-in period.
9. Periodically check coolant level, controls, etc. Along with the items outlined in the periodic maintenance
chart.
10. At the end of the break-in period, change the oil and filter ( 2 0 hours or 200 miles / 320 km ) .
Operating Your Vehicle
82
Publicité
