Publicité
Les langues disponibles
Les langues disponibles
Change the Crankcase Oil
1. Place the vehicle on the level ground and park the vehicle.
2. Start the engine and warm for ( 2 ~3 ) minutes, then stop the
engine.
3. Place a pan under the engine drain hole ( 1 ) to store the engine
oil.
4. Remove the dipstick and wipe it clean.
5. Remove the crankcase magnetic drain bolt ( 3 ) and washer ( 2 )
to drain out the oil.
6. Confirm the crankcase is drained completely.
7. Remove the three oil filter cover bolts ( 4 ) .
8. Remove the oil filter cover ( 5 ) .
9. Inspect the O-ring ( 6 ) in the cover, to ensure it is in good
condition. Replace with a new one if damaged.
10. Mount O-ring ( 6 ) into the oil filter cover, and apply a layer of
fresh engine oil for lubricating.
11. Install a new oil filter ( 7 ) .
12. Mount oil filter cover ( 5 ) , then install and tighten the cover bolts
to the specified torque.
Maintenance
135
1
2
3
Publicité
