Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Engine Valve Clearance Adjustment
The intake and exhaust valve clearances change with use of the vehicle, which can result in improper fuel/air
supply or engine noise. To prevent this, the valve clearances must be adjusted according to the maintenance
schedule. This adjustment should be performed by a professional service technician. Contact your dealer for
service.
NOTE:
Intake valve clearance ( c old engine ) : 0�0024 in ~ 0�0055 in� ( 0 �06mm ~ 0�14mm )
Exhaust valve clearance ( c old engine ) : 0�0043 in ~ 0�0075 in� ( 0 �11mm ~ 0�19mm )
Engine Idle Speed
This vehicle is equipped with an electronic fuel injection system. The throttle body is a vital part of the fuel
system which requires very sophisticated adjustment, and was set at the factory. There are no consumer
provisions to adjust engine idle speed. If the settings are disturbed, poor engine performance and damage
may result. Check the engine idle speed for stability or an abnormal engine idle condition and contact your
dealer for service if necessary.
140
Publicité
