Publicité
Les langues disponibles
Les langues disponibles
•
A kinked winch cable made of wire rope that has been "straightened out", even though it may look
usable, has been permanently and severely damaged. It can no longer achieve its load capacity
rating. Promptly discontinue use of a winch cable in this condition.
•
A winch cable made of synthetic rope should be inspected for signs of fraying. Replace the cable if
fraying is observed. Promptly discontinue use of a winch cable in this condition.
•
Replace synthetic winch cable if fused or melted fibers are discovered. The synthetic rope will be stiff
and appear smooth or glazed in the damaged section. Promptly discontinue use of a winch cable in
this condition.
•
Never replace a synthetic winch cable with consumer-grade polymer rope. Only use cable that is
specifically designed for winch use.
•
Never grease or oil a wire rope winch cable. This will cause the cable to collect debris that will shorten
the life of the cable.
•
Never operate the winch with a damaged hook or latch. Always replace damaged parts before using
the winch.
WARNING: Replace the winch cable and components at the first sign of damage to prevent SEVERE
INJURY or DEATH in the event of failure�
Winch Cable Spooling Guidelines
After winching is complete, especially if winching at an angle, it may be necessary to re spool the winch cable
evenly across the drum. This reduces the chances of the winch cable "wedging" itself between lower layers
of cable. You will need an assistant to perform this task:
•
A. Release the winch drum.
Safe Operation - Driving Safely
113
Publicité
