Télécharger Imprimer la page

Derbi RAMBLA 250 i.e. Mode D'emploi page 165

Publicité

RAMBLA 250 i.e.
LAMPADE/SPIE
Lampada luce
anabbagliante/ abbagliante.....12 V - 55 W - H7
Lampada luce posizione...................12 V - 3 W
Lampada luce indicatori di
direzione .........................................12 V - 10 W
Lampada luce di posizione
posteriore/stop ............................12 V - 5/21 W
Lampada luce targa..........................12 V - 5 W
Lampada illuminazione cruscotto ...............LED
Spia indicatori di direzione..........................LED
Spia luce abbagliante .................................LED
Spia riserva carburante ..............................LED
Spia EFI ..................................Nel display LCD
Gruppo ottico anteriore
Nel fanale anteriore sono alloggiate:
- una lampada luce abbagliante«1»;
- una lampada luce anabbagliante «2»;
- una lampada luce di posizione«3».
Per la sostituzione:
- Svitare e togliere le viti «7»
5
ATTENZIONE
OPERARE CON CAUTELA.
NON DANNEGGIARE LE LINGUETTE E/O
LE RELATIVE SEDI D'INCASTRO.
MANEGGIARE CON CURA I COMPO NENTI
BULBS/WARNING LIGHTS
High-/low-beam bulb ..............12 V - 55 W - H7
Tail light bulb......................................12V - 3W
Turn indicators bulb .........................12V - 10W
Rear tail light /stop light bulb.........12V - 5/21W
License plate light bulb ......................12V - 5W
Instrument panel lighting bulb....................LED
Turn indicator warning light........................LED
High-beam warning light ............................LED
Low fuel warning light ................................LED
EFI warning light ...............On the LCD display
Front light group
In the front headlight there are:
- one high-beam bulb «1»;
- one low-beam bulb «2»;
- one tail light bulb «3».
For replacement:
- Undo and remove the screws «7»
5
CAUTION
PROCEED WITH CAUTION.
DO NOT DAMAGE THE TABS AND/OR
THEIR CORRESPONDING SLOTS.
HANDLE THE PLASTIC AND PAINTED
COMPONENTS WITH CARE, DO NOT
SCRATCH OR SPOIL THEM.
La manutenzione - Maintenance
LAMPEN/ KONTROLLLAMPEN
Fernlichtlampe/
Abblendlichtlampe ...................12 V - 55 W - H7
Standlichtlampe......................................12V - 3W
Blinkerlampe ........................................12V - 10W
Rücklichtlampe/ Bremslicht...............12V - 5/21W
Lampe Nummerschildbeleuchtung .......12V - 5W
Lampe
Armaturenbrettbeleuchtung ...........................LED
Blinkerkontrolle...............................................LED
Fernlichtkontrolle ............................................LED
Kraftstoffreservekontrolle ...............................LED
EFI-Kontrolle ..............................Am LCD-Display
Auswechseln der
scheinwerferlampen
Im vorderen Scheinwerfer befinden sich:
- Eine Fernlichtlampe «1».
- Eine Abblendlichtlampe «2».
- Eine Standlichtlampe «3».
Zum Wechseln:
- Die Schrauben «7» lösen und abschrauben.
5
Achtung
VORSICHTIG ARBEITEN.
DIE SPERRZUNGEN BZW. DIE
STECKVERBINDUNGEN NICHT
Wartung
165

Publicité

loading